|カタログ||solar wind hybrid led street light(horizontal wind turbine-L-7H)|
|単価||US $ 50 / piece|
1. Twice total light output:
The most important point of our super bright low led street light is not watt but the total light output which is as twice as much of high power led street light when the watt are the same. Ours can be145 ~160luminous/watt however others can only be up to 80 luminous/watt. if you plan to buy 75W of high power led street light, then 37W of ours is enough for your need. please never use the same watt of high power led street light to compare the price with our low power led street lights. Please use 75W of high power led street light with our 37W,then you will find we are the lowest. So We are the most cost effective.
2. Return On Investment is half time shorter:
Comparing with high power led street lights, our low power led street is much less energy consumption.so if your application is powered by solar or solar-wind energy,you need half solar panel, half battery, half power of wind turbine And controller, which largely reduce the total cost and greatly enable you much more competitive, as the total price of all company is based on the usage of every components. So the return on investment is half time shorter than your choosing high power led street light.
3. Much less heat generation:
So the performance is much stable and much less lighting decay, which will surely prolong the life span.
4. Inclination adjustable:
We design a special elbow which enable you to adjust the inclination by every 5o
|1) Light Source: Particular & Ultra bright 660 LEDs|
2) Total light output: 5600lm
3) Average Illuminance: 18lux/10m; 25lux/8m; 42lux/6m
4) LED energy consumption: 37W
5) Total energy consumption: 42W
6) Rated Voltage: 12VDC, 85~130VAC, 180~260VAC
7) Power factor > 0.91
8) Light Color: Warm White(3000~3500K), Pure White(6500+/-300K) or Cool White(>9000K)
9) Beam Angle: 130° × 60°
10) Lifetime: 50,000+ hours
11) Protection Rating: IP65
12) Size: 440 X 380 X 190mm
13) Net weight: 12kg
14) Installation tube inside diameter: 60mm
15) FCC, CE and RoHS approved
16) MOQ: 10pcs
17) Guarantee: 3 years
|mono or polycrystalline silicon solar panel,stable performance.|
life span can be used for >25 years.
2 working power mode
|full power all night mode with different daily light on period 8~12 hours||half power atfer midnight mode with different daily light on period 8~12 hours|
Magnetic Suspension wind power Generator
300W Full Permanent Magnetic Suspension wind power Generator
Starting Wind speed(m/s) 1.5m
Cut-in wind speed ( m /s ) 2.5 m/s
Rated wind speed ( m /s) 10m/s
Survival wind speed ( m/s) 50m/s
controller Rated DC output 12v/24v
over-speed protection Electromagnetic Torque control
Generator Brushless NdFeB Permanent Magnet Generator
Bearing Full Permanent Magnetic Suspension
Transmission Mode Direct Drive
Application Ratio(Cp) 0.42
Color White /silver/ Gray
Net weight 20KG
Gross weight 23KG
Rotor diameter 1500mm
Length of Blade 575 mm
Length of Body 1220mm
Blades Materia Reinforced Nylon
Exclusive maintenance-free,stable performance.
|Daily light on 8~12 hours||
Different capacity for back up rainy days optional 3~7 days
|Controller||300W solar wind turbine controller|
Technical Parameters :
Wind Turbine Input: Three Phase AC, V ≤ 50V, P ≤300W
Photovoltaic Cell Input: DC 35.0Vpm，I≤15A
Controller Output Voltage: DC 28.0V
Wind turbine Over Input Voltage Protection Value: AC 50V +/-5V
Wind turbine Over Output Current Protection Value:DC11A +/-1A
Applicable Storage Battery: 24V, 100~200Ah
Maximum Current Output for Load:1 <15A
Battery Protection Under-Voltage Trigger:DC 21.0±0.3V
Battery Protection Under-Voltage Recovery:DC 23.0±0.3V
Physical Dimension: L260mm x W150mm x H80mm
Operational Environment: Ambient Temperature -20 Deg.C ~ +50 Deg.CRH Humidity: 0 ~ 90%
SMART-CONTROLLER developed for use with FD1.5-0.3/10C
Magnetic-Levitation Wind Power Generator ONLY.
Technical Functions :
1. Power tracing model adapted for max. ultilization of Wind & Solar energy.
2. With multi-circuit intelligent feedback controls on I/O loading.
3. A Charger with electric current control regulator lengthening battery lifespan.
4. Available with Time Control or outdoor Light Sensors, Automatic On/Off Loading, automatic adjustable lighting
hours and luminance.
5. Designed with solution on preventing reversed connection, over or underpower charging, Input/Output voltage
and current stabilizing control,Rotor over-speeding control.
6. With Operation Indicator Lights.
the poles were made for high-quality steel plate, with the appearanceof hot-dip galvanizing spray after treatment;
|optional height||thickness of pole||top side diameter of pole||bottum side diameter of pole||arm length|